LETAU Double Layer Cordless Window Shades, 2 Shades in 1 Window, 100% Blackout and 50% Blackout Alternate, Provide Multi Light Control Solutions Window Blinds, Dark Grey

MOUNT TYPES: Inside mounted shades will have a deduction taken of approximately 1/4" to ensure a proper fit inside the window frame.Inside mounted shades require a minimum frame depth of 4inch for secure installation. If your window frame depth is less than 2.5inch please select outside mount.Outside mounted shades should be ordered with the exact width of the area you wish to cover. Outside mounts are often used when there is not sufficient frame depth for inside mounting.Our shades come with all mounting hardware, and mounting hardware for both inside mount and outside mountINSIDE MOUNT MEASUREMENT: Step 1.Measure the inside frame width at three locations-the top,middle,and bottom. remark the smallest of the 3 measurements and use that number deduct 1/4inch as your inside width when ordering.Step 2. Measure the height at 3 locations-the left,middle,and right side. remark the smallest of the 3 measurements and use the number as your inside width when ordering.OUTSIDE MOUNT MEASUREMENT: Step 1. Measure the outside frame width adding 6-10inch to be the outside mount width.Step 2. Measure the outside frame length adding 5-10inch to be the outside mount length. The overlap it recommended to allow appropriate coverage and avoid any light gaps.Type: Solid color roller shade.Feature: Thermal Blackout Waterproof Material: Polyester FabricInstallation: All Mounting Hardware Included.

• PRODUCT: 2 Layer fabric window shades, 2 shades in 1 track, If you want to block all light, you can roll down the 100% blackout fabric, if you want some light get into room but keep privacy you can roll down the 50% Blackout fabric. This product provides multi light control options.
• PLEASE RESPONSE EMAIL: We can customize shades up to an 1/8th inch. Order the closest size and then we will send email within 24 hours to confirm window information, please give us confirmation in 48 hours. You can get roller shades earlier if reponse us sooner. PAY ATTENTION: PO BOX and APO address not accepted
• INSIDE MOUNT: Min depth for inside mount is 4".Order size is your window size NOT shade size,we will take proper deduction to make sure shade can fit into window. PAY ATTENTION: The shade width includes brackets which take up a minimum of 0.6" on each side so fabric width will be at least 1.2" smaller than total.For inside mount you will have tiny gap on each side but it usually can be covered by window frame, if your frame is too thin to cover the gap pleasse change to outside mount
• OUTSIDE MOUNT: Order size is the shade size NOT window size. Shade width need to be 3-6" wider than window width, shade length need to be 8-10" longer than window length for better coverage. Our shade are good for both inside mount and outside mount, shade size need to be very accurate so please make sure check below MOUNT TYPE AND MEASUREMENT information before order.
• MADE TO ORDER: If you can not find your size on the size list or you are not sure how to get the right size please contact us we can customize any size up to 78"W x 96"L. And if you have more than 4 windows to cover please send testing order to confirm color, quality, size and you can send us email for your testing order, we will take it as first priority and ship by fastest service to save your time.