Magicutter Professional Portable Handheld Ultrasonic Knife Cutter for Cutting 3D Printed Models, Acrylic, Wood, Plastic and Fabric, 30 Watts, 40KHz

Features:

• High efficiency & precision: With 40,000 vibrations per second (40 kHz) and an output power of up to 30 W, this ultrasonic knife cuts material smoothly, and it provides precise control over the depth and extent of the cut
• No stand required & easy to carry: Weighing only 120 g, this ultrasonic knife is lighter than traditional products and does not require a stand for more flexible use. Batteries are not included in the machine, and it can be used directly on the power supply or mobile power. Easy to carry on the go, with 40 replacement blades, you can easily change the blades
• Package contains: 1×Ultrasonic Cutter, 1×Dual Type-C power supply lines, 1×Adapter, 40×Spare Blades, 2×Blade Holder, 5×Fastening Screws. The ultrasonic knife has no vibration feel or sound during start-up, and is noiseless during use
• A must for model hobbyist: It can quickly separate plastic model parts and handle sprues more neatly. It can cut Carbon fiber plates, Paperboard, Cardboard, Plastic Pipe, Plastic Cases, Timber, Wood, Acrylic, PVC Foam Board, Leather, Data Liners. Safe to use for the elderly and disabled
• WARNING: Please read the Instruction Manual carefully before use and wear protective gloves; the Ultrasonic cutter is sharp so please keep away from children

Details: ⌜Product Specification⌟
Ultrasonic Vibration Frequency: 40KHz
Product Dimensions (Unit: inches): 1.02 * 0.91 * 7.17
Weight: 4.23 ounces (excluding power cord)
Maximum Output Power: 30W
Rated Voltage: DC 12V / 15V
Fast Charging Power Delivery: PD, QC (12V - Normal / 15V - High)
Operating Environment: 5 - 35℃, humidity 20% to 70% (non-condensing)

⌜Auto Stop Explanation⌟
In the Normal Mode (indicated by a green light), the operation will automatically stop after approximately 5 minutes. You can restart by pressing the button again without cooling down time.
In the High Mode (indicated by a yellow light), the operation will automatically stop after approximately 2 minutes. You can restart by clicking the button again (or long press) without cooling down time.

⌜Notes⌟
Please note you will need an external charger or power bank with the following.
Cannot cut materials that are harder than the blade, such as metal, glass, ceramics and marble. If forced to cut, the blade will be damaged.
There is no limit to the continuous working time, the 5-minute automatic power-off function is for safety reasons.

Part Number: 1